Description
Finally a truly complete brake hose set for your Triumph TR2, TR3 to TS13045.. This range of Triumph is know as TR3 using the Lockheed system. We had starting a job and then find out you don't have all the pieces to finish it. Here all in one kit we have all the hoses, lock nuts and washer you will need to change out the brake hoses on a Triumph TR2 to TR3 TS13045. It includes Two Front Brake Hoses, One Rear Brake hose, three shake proof lock washers, three correct thin jam nuts for the brake hoses, Two copper washer for the front Wheel Cylinders and Four copper washer for banjo fittings, one distribution block for the rear hose.
It is a well known fact that the typical life of a rubber brake hose is about six years. Many things causes the brake hose to break down, such as contaminants in brake fluid, high brake temperatures from heavy braking, the hose is constantly flexing and moving from steering and suspension which weakens the hoses. It can be very hard to tell if a brake hose is bad because sometimes brake hoses deteriorate from the inside out. They swell and almost pinch themselves shut but still look fine on the outside. Keep a careful look out for signs of deterioration, such as cracking, extremely hard or weak feeling hoses. All the while the hose can be shedding off particles and filling your wheel cylinders or calipers with contaminates. Changes your brake hoses and keep your car stopping safe.
