Description
This is the Inner Tie Rod Kit for a the Triumph TR4A, Triumph TR250 and Triumph TR6. With this kit you will get all the wear items that are needed when rebuilding your steering rack. Made like original with a forged shaft and threaded on the outer end which the outer tie rod screws on. Plus the hardware, Inner tie rod cup 158732, Inner tie rod spring 120953, Two Inner Shims .002 120953, and one lock tab for the nut 120957. With all these pieces you can rebuilt one side of the inner tie rod on your Triumph. Which can be bent very easily if you a curb or a pot hole in the road at an angle. The design of the inner tie rod needs to have a large amount of movement, which means it needs to have a taper right before the ball for complete movement. This allows angular movement of the steering when the steering wheel is turned and the suspension moves up and down. But this is a small area that can be easily bent if a strong force and popping a curb happens. It is a good idea once a year to pull back the steering rack boots and inspect. As you know steering is a very important part of driving and you should keep and eye on it.
